5.1.2 914-HDE Serial Port Configuration
Figure 5-9 shows how to configure each serial port. Select the desired protocol, termination and timeout (if
applicable). Press "Apply" to save the changes. These settings are non-volatile and do not need to be re-configured
each time the 914-HDE is powered.
Typical Settings: (Refer to Section 4.4)
RS-485:
RS-422:
RS-232:
Focal Technologies Corporation
A Moog Inc. Company
Model 914-X Series Modular Multiplexer System User Manual
1 ms timeout; terminations enabled
terminations enabled
No options.
Figure 5-9: 914-HDE Serial Port Configuration
Document Number: 914-0601-00 Rev. 5.0
Page 5-8