2
Installation
Step 1. Prepare to install
Step 1. Prepare to install
The Multimode Enablement Kit, G1978-60451, is shipped with the multimode
source. This kit needs to be installed before the multimode source is used.
Note that the multimode source and its accessories are to be installed by an
Agilent Customer Engineer.
1 Check that the Multimode Enablement Kit contains the following parts:
Figure 3
From left to right: G1960-60858, G1960-61015 and G1960-60873
2 Install the APCI Enablement Kit, G1947-60451, which is shipped with the
Figure 4
From left to right: G1946-80058, G1960-60802 and G1960-60856
18
•
Multimode Bd HV Cable, p/n G1960-60858
•
Multimode HV PCA, p/n G1960-61015
•
Multimode Bd Power/Data Cable, p/n G1960-60873
multimode source.
The APCI Enablement kit contains the following parts:
•
Fast APCI HV Supply, p/n G1946-80058
•
Valve BD-APCI Supply Cable, p/nG1960-60802
•
Valve BD-APCI Needle Interlock Cable, p/n G1960-60856
Multimode Source for 6410 Triple Quad LC/MS User Guide