Icom IC-M412 Instruction Manual page 22

6
DSC OPERATION
n DSC address ID
D Programming Group ID (Continued)
t Push [Y] or [Z] to set up to a 10-character ID name.
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the programming mode.
y Push [ENT] to program and returns to the normal opera-
tion.
16
D Deleting Group ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "ADDRESS," and push [ENT].
e Push [Y] or [Z] to select "DEL GROUP ID," push [ENT].
• When no group ID is programmed, "NO ID" is displayed.
r Push [Y] or [Z] to select a desired ID name for deleting
and push [ENT].
• "READY" appears.
t Push [ENT] to delete the selected group ID and returns
to the normal operation.
Scrolls