Programming Auto Heat Up; Stop & Go Function; Recall Function - Novy Panorama 1821 User Manual

Hide thumbs Also See for Panorama 1821:
Table of Contents

Advertisement

Available languages

Available languages

Reduce the time
press
on the timer
Increase the time
press
+
on the timer
After a few seconds the LED no longer flashes [ min ]. The time
has been selected and the countdown has begun.
Switch off the timer function
Select the timer
Press on
and
+
at the same time until the
desired hourglass lights up
Stop the timer
Keep pressing
on the timer until the timer
displays
,
000
or set the power of the cooking zone to
If different timers are to be activated on multiple zones, this
operation must be repeated several times. The activated timer
lights up next to the appropriate zone.
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking:
Timer without cooking
Switch on the hob. Press
Select the timer
Press
and
+
simultaneously on the timer
Reduce the time
press
on the timer
Increase the time
press
+
on the timer
After a few seconds the LED no longer flashes [min]. The time
has been selected and the countdown has begun.
1821_110119_GA2.indd 63
Turn off automatically at the end of the cooking time:
060‐
As soon as the selected cooking time is up, the display will flash
059...
000
To stop the audible signal and the flashing, press
001‐
timer.
002...

4.3.6 Programming auto heat up

All cooking zones are equipped with an auto heat up function.
The cooking zone will initially operate at full power for a certain
amount of time before automatically reducing to the selected
power level.
Display
remaining
Activating auto heat up
time
Glide your finger over the slider to (for example)
and hold for 3 seconds
7
Switching auto heat up off
000
Glide your finger over the slider
0
Set value for cooking time
Display
000
4.3.7 Stop & Go function
This function temporarily interrupts the activity of the hob and
060‐
allows a restart with the same settings.
059...
001‐
Switching on
002...
Press
Switching off
Press
Then press the animated slider

4.3.8 Recall function

After turning the hob off
to recall the last selected settings: (this up to a maximum of 10
seconds)
– State of all cooking zones (power)
– Minutes and seconds of the programmed cooking zones by
the timers
– "Automatic cooking" function
– Keep warm function
– 63 –
, a beep will be heard, and the cooking zone will turn off.
Programming auto heat up:
0
to
9
Auto heat up table
Auto heat up function
1
2
3
4
5
6
7
8
9
Turning Stop & Go on and off:
II
II
, it is possible
or
+
on the
Display
7 A
Display
0‐9
Time (min:sec)
0:40
01:12
02:00
02:56
04:16
07:12
02:00
03:12
--:--
Display
I I
0‐9
19/02/18 23:14

Advertisement

Table of Contents
loading

Table of Contents