Maintenance Of The Extraction Hood; Cleaning After Use; Cleaning The Grease Filters - Novy Panorama 1821 User Manual

6.2 Maintenance of the extraction hood

6.2.1 Cleaning after use

- Raise the extraction tower to its highest position, press
(several times) on
- Raise the uppermost glass from the extraction tower.
Clean with a damp cloth or sponge, use of a pH-neutral
detergent is possible. Wipe dry with a dry cloth/ kitchen paper.
- Tilt the front piece of glass using both hands and lift it out of
the extraction tower.
Clean the front and back of the glass with a damp cloth or
sponge, use of a pH-neutral detergent is possible. Wipe dry
with a dry cloth/ kitchen paper. with a dry cloth/ kitchen paper.
Press the button after all parts are reinstalled.

Never use objects that could damage the glass such
as an abrasive sponge, abrasive cleaning liquid or
aggressive cleaning agents.
1821_110119_GA2.indd 68

6.2.2 Cleaning the grease filters

When the grease filters must be cleaned, this is indicated by the
grease filter cleaning indication (see 4.5.1)
- Follow the steps described in 6.2.1.
- Take the grease filters out of the extraction tower (keep the
position of the grease filter in mind; there is a left and a right
grease filter)
Clean in dishwasher or immerse in hot water containing
degreasing detergent.

WARNING: If the instructions described above are
not followed, residue in the filter may cause a fire.

The uppermost extraction tower glass must NOT be
placed in the dishwasher. This may cause scratches
in the glass; it may also damage the coating on the
base.
After cleaning:
– Return the filters and the glass into the extraction tower.
– Press the button after all parts are reinstalled.
– Press the control key for 3 seconds.
– 68 –
19/02/18 23:14