Using The Device; User Modes; Exhaust Mode; Recirculation Mode - Novy Panorama 1821 User Manual

4 USING THE DEVICE

4.1 User modes

This device can be used in the exhaust or recirculation mode
(standard setting upon delivery)

4.1.1 Exhaust mode

The air sucked in is first cleaned by the grease filters before
being removed to the outside. This can be achieved by making
use of a series of channels connected between the device and
a wall exhaust cover.
To set the device in exhaust mode, press and hold the key
+
combination and
extraction tower is closed.
The led next to the Cleaning indication for recirculation filter will
blink 3x.

4.1.2 Recirculation mode

The air sucked in is first cleaned by the grease filters. The
scents are then removed in the Monoblock recirculation filter
before re-entering the kitchen.
To set the device in recirculation mode (default setting), press
and hold the key combination
when the extraction tower is closed.
The led next to the Cleaning indication for recirculation filter will
be on for 3 seconds.
1821_110119_GA2.indd 61
‐ and for 3 seconds when the
+
‐
and and for 3 seconds

4.2 Control keys and slide operation

The device is equipped with touch control keys with which you
can set the various functions. Touching the control key operates
the function. Activating a function will cause a light, reading
and/or sound signal to be displayed.

WARNING: Do not push multiple control keys
simultaneously during normal use.
In order to select power, simply glide your finger over the slider,
just below the LED indication.
You can also access a certain level directly by using your finger
to select the desired level.

4.3 Controlling the hob

4.3.1 Switch on and off

Switching the hob on and off:
Switch on
Press and continue to hold for 2 sec
The LED will light up
Switch off
Press
LED goes out
Switching a cooking zone on and off:
Set up
Slide from left to right on the slider
(Power control)
Switch off
Slide from right to left on the SLIDER until the
display shows or = "Hot".
0 H
If there is no control input within 20 seconds, the electronics will
return to the wait position.

4.3.2 Pan detection

This hob is equipped with an interactive control system that
makes use of the hob even easier.
When you place a pan on the hob, it is automatically detected.
You will also see a to show you which slider to use for the
0
zone in question. The pan detection ensures optimum safety.
– 61 –
Zone for slider control
Display
0‐9
0
H
19/02/18 23:14