Saltwater Series 220, 240, 2310, 2410 - Ranger boats Z-Comanche Owner's/Operator's Manual

Electrical Systems
SALTWATER SERIES
220, 240, 2310, 2410
Saltwater Switching
The main battery disconnect switch must be turned to battery 1 in order for the switching system
to turn on. A second battery can be installed on 2. The second battery can be used for a means
of boosting battery 1.
Horn – This switch operates the horn on the boat. While pressing this button the horn will sound.
Once released, the horn will stop sounding.
Bilge – This switch operates the standard bilge on the boat. Pressing this button once will operate
the bilge. Pressing it again will turn the bilge off.
Navigation lights – This switch operates the Navigation Lights. Pressing this switch once will turn Navigation lights – This switch operates the Navigation Lights. Pressing this switch once will turn
on the red/green as well as the anchor light. Pressing this switch a second time will turn the lights
off.
Anchor light – This switch operates the anchor light. With the Navigation Lights off press this
switch once and the Anchor Light will come on. Pressing this switch a second time will turn the
light off.
LW. Fill – This switch operates the live well fill pump. Pressing the switch once will turn the live
well fill pump on. Pressing it a second time will turn the pump off.
LW. Fill Timed – This switch operates the timer for the live well fill pump. With the LW. FILL off,
pressing this switch will activate the pump in a timed cycle of 3 minutes on and 2 minutes off.
Pressing this switch a second time will turn the pump and timer off.
LW. Recir. – This switch turns on the recirculation pump. Pressing this switch once will turn the LW. Recir. – This switch turns on the recirculation pump. Pressing this switch once will turn the
pump on and pressing it a second time will turn the pump off.
LW. Recir. Timed – This switch operates the timer for the live well recirculation pump. With the
LW. Recir. Off pressing this switch will activate the recirculation pump in a timed cycle of 3 minutes
on and 2 minutes off. Pressing this switch a second time will turn the pump and timer off.
BW. Aerator – This switch operates the bait well fill pump. Pressing this switch once will turn the
pump on. Pressing it a second time will turn the pump off.
BW. Aerator Timed – This switch operates the timer for the bait well fill pump. With the BW.
Aerator switch off, pressing this switch will activate the bait well fill pump in a timed cycle of 3
minutes on and 2 minutes off. Pressing this switch a second time will turn the pump and timer off.
INT. LTS – This switch will operate any interior, bait/live well and box lights installed on the boat.
Pressing this button once will turn the lights on and pressing it a second time will turn the lights
off.
ACC – This switch operates any accessories installed on the boat. Pressing the switch once will
turn the accessory on and pressing it a second time will turn the accessory off. Our standard
setup: the optional bilge is installed on ACC 1, raw water wash down is installed on ACC 2,
optional aerator is installed on ACC 3, and the fresh water wash down is installed on ACC 4.
51