Special Information; Your Ranger Dealer's Responsibilities; Owner/Operator's Responsibilities - Ranger boats Z-Comanche Owner's/Operator's Manual

SPECIAL INFORMATION

The following special information is intended to alert you to possible dangers and to information important to
the safe operation of your boat and other equipment. Observe them carefully. However, simply being aware of the
"WARNING", "CAUTION" AND "NOTICE" notations in this manual will not eliminate the dangers that they signal if
you do not implement the information. These warnings, plus common sense operation will insure you a safe and
fun boating or fishing outing.
Please take special note when you see one of the following signs:
WARNING
CAUTION
NOTICE
ALL information or instructions in this manual could be necessary for proper operation and/or maintenance.
If you do not understand any portion of this manual, please contact your Ranger dealer or our Customer Service
Department for any additional information.
IMPORTANT:

Your Ranger Dealer's Responsibilities...

Generally, it is the dealer's responsibility to the customer to make sure that the boat has been equipped as
ordered with a properly installed and functioning engine that is within the horsepower rating specified for that model
boat. The dealer should see that the engine is outfitted with the proper propeller for that boat model and for the load
that the boat is normally expected to carry.
The dealer should help to familiarize the customer with the onboard equipment and explain operation of this
equipment; the engine operation; and the proper functioning and operation of the boat itself.
Prior to delivery, the dealer should make certain that the product and equipment is completely operational; the
proper propeller is installed; and that all oil, fuel system and lubrication systems are understood. The dealer should
explain the operation of all instrumentation equipment, and the boat electrical and livewell systems.
The dealer should check for correct carburetor adjustment, throttle and steering functioning, and instrumentation
accuracy. Engine cooling water should be properly circulating.
The dealer should test for maximum engine RPM as specified in the engine manufacturer's specification
sheet(s) and/or engine owner's manual for proper operation of all equipment and for proper adjustment of steering
effort and direction. All necessary adjustments for maximum efficiency should be made.

Owner/Operator's Responsibilities...

It is the owner/operator's responsibility to perform all safety checks and to ensure that all lubrication and
maintenance instructions are complied with for maximum safety and proper operation.
Special Information
Failure to follow the advice of a "WARNING" may result in bodily injury
or death.
Non-compliance with "CAUTION" instructions could result in failure of,
or damage to, the product and/or equipment.
Draws special attention to installation, operation, or other important
maintenance information.
5