How To Assemble Your Light Kit 1 - Fanimation DUPLEX FPD6254GR Manual

How to Assemble Your Ceiling Fan Blades (Continued)
3. Assemble the blade holder cover to bottom of the
motor assembly using the previously removed screws
and securely tighten all six screws. (Figure 3)
How to Assemble Your Light Kit
1. Remove one of the three screws in the adaptor
plate at the bottom of the motor assembly and retain
the screw for later. Slightly loosen the remaining two
screws. (Figure 1)
2. Assemble the light plate assembly to the adaptor
plate of the motor assembly using the two key slots
in the light plate assembly. Replace the third screw
and securely tighten all three screws. (Figure 2)
3. Remove two screws in the light plate assembly
and retain the screws for later. (Figure 3)
Blade Holder
Cover
Motor Assembly
Light Plate
Assembly
12
Motor Assembly
Figure 3
Motor Assembly
Figure 1
Light Plate
Assembly
Figure 2
Figure 3