Fanimation DUPLEX FPD6254GR Manual page 13

How to Assemble Your Light Kit
4. Connect the 2 pin connectors from the LED
assembly to the 2 pin connectors from motor assembly.
(Figure 4)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
5. Assemble the LED assembly to the light plate
assembly using the screws removed in Step 3 and
securely tighten all two screws. (Figure 5)
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
6.
Securely attach the light screw cover over the screws
in the light plate assembly utilizing the key slot twist-lock
feature. (Figure 6)
(continued)
Motor
Assembly
Light Plate
Assembly
LED Assembly
Light Plate
Assembly
13
LED Assembly
Figure 4
Figure 5
Light Screw
Cover
Figure 6