Flash Trigger Functions - Vello FreeWave Captain User Manual

FLASH TRIGGER FUNCTIONS

TTL EV Control
The Vello FreeWave Captain's transmitter
provides the user with the ability to manually
adjust the TTL reading of a TTL-capable
flash. This function can adjust the TTL
reading in 1/3 stops between -3 and +3. To
use this function, simply push the + or - EV
buttons on the bottom of the transmitter.
Tip: Each photographer has their own vision
of proper image exposure. The EV settings
allow the photographer to adjust the TTL
exposure to reflect their own specific vision.
Note: Remote flash units attached the Vello
FreeWave Captain receiver need to be set to
TTL EV 0 for proper TTL exposure control
by the Vello FreeWave Captain transmitter.
Separate EV adjustments to individual remote
flashes will result in improper TTL exposure.
Note: The Vello FreeWave Captain is optimized for
Nikon and Canon TTL flashes. Not all third-party
flashes may be compatible.
Camera-Specific Information
For more information about your specific camera
visit our page here:
www.vellogear.com/Camera_Specific_Compatibilities/
17