Setting The Control To Factory Defaults - Raypak TempTracker mod+ Hybrid Installation And Operation Instructions Manual

30 Raypak, Inc.

settInG tHe control to FactorY deFaults

To Reset the TempTracker mod+ Hybrid control to its original factory defaults, power down
TOTAL CLEAR STARTED
the control. Hold down the two right most buttons while powering the control back up until
Release buttons
the TOTAL CLEAR STARTED screen appears. The Display will direct you to the
and
Startup menu to program the control after the defaults are loaded.
Please Wait
NOTE: When resetting the control to original factory defaults all control settings will be overwritten and will no longer exist.
note
Do not turn off power to control until all Startup settings have been made. Otherwise, the next
power-up will be set to many Startup factory settings that may not fit your application.