Table of Contents
Advertisement
FORM 145.18-IOM1
ISSUE DATE: 8/30/2018
After installing the unit, show the user
how to turn off the electricity to the unit.
Point out control and switch locations for
turning off the electricity.
Ensure the user understands the impor-
tance of following all safety precautions.
NOTICE AND DISCLAIMER
This unit contains refrigerant installed by the factory
that is approved for use in the unit's intended country
of installation or market. Distributors are only autho-
rized to provide refrigerants that have been approved
for use in the countries or markets they serve.
The refrigerant used in this unit is identified on the
unit's nameplate and in this manual. Any additions of
refrigerant into this unit must comply with the coun-
try's requirements with regard to refrigerant use and
should be obtained from manufacturer approved dis-
tributors. Use of unapproved refrigerant substitutes
will void all warranties and can cause injury or death.
Disclaimer
Customer modifications to certified products are pro-
hibited. If performed without the express written ap-
proval of the manufacturer, modifications will void
all warranties (expressed or implied) and may result
in hazardous situations resulting in equipment damage,
serious physical injury or property damage, or death.
The manufacturer has certified the product as being
compliant with applicable government and/or industry
standards. Product certification is designated either on
the product itself or in the product literature. The cer-
tification mark identifies the applicable standards as
well as the Nationally Recognized Test Lab (NRTL) or
other testing facility that conducted the testing, where
applicable.
If changes are made to the product, an engineering re-
view is required to assess the impact to the product cer-
tification. In some instances, the changes may require
that the NRTL or testing facility review and re-approve
the product by means of a field or site inspection and
certification.
SECTION 1 - INSTALLATION
Modifications may invalidate product certifications or
violate country standards. Any person or entity making
changes to the product is responsible for obtaining the
required engineering review and approval, as well as
covering certification and other related costs.
Unauthorized customer modifications to certified
products are prohibited for the following reasons:
A. Modifications may create hazards that could result
B. Modifications will void product warranties.
C. Modifications may invalidate product certifica-
PRE-INSTALLATION
Literature
Review this Installation, Operation, and Maintenance
(IOM) manual prior to installation. After installing the
unit, give this IOM to the end user. If help is needed
with any of the installation instructions or matters re-
lating to the unit, contact the sales office where you
bought the unit. You may also refer to the unit rating
plate for a contact name.
Shipping
Cabinets and risers ship in one of the following con-
figurations:
in death, serious injury, or equipment damage.
tions and may violate country standards. Country
standards may require that only certified products
be used in certain applications, and modifications
that result in the loss of product certification may
violate those standards.
• Cabinets are stacked on their side with risers at-
tached. Chassis ship on separate skids.
• Risers ship loose, packaged in boxes and sorted
by floor. Cabinets ship upright up to four per skid.
Chassis ship on separate skids.
• Risers ship loose, packaged in boxes, and sorted
by floor. Cabinets ship upright on skids with chas-
sis inside the cabinet. Chassis electrical and water
connections are not installed. The chassis is se-
cured to the service panel. Remove the screws be-
fore removing the service panel and chassis.
The cabinet must remain standing upright. Do not
place cabinets on their side with the chassis inside.
1
9
Hide quick links:
Advertisement
Table of Contents
