Technical Specifications - Novus LogBox Wi-Fi Instruction Manual

17. TECHNICAL SPECIFICATIONS

CHARACTERISTICS
Input Channels
Compatible Analog Signals
Internal Measurements
Analog Channels Input
Impedance
Pt100
Digital Input
Digital Output
Display
Resolution
Memory Capacity
Log Range
Log Type
Log Trigger
Alarms
Internal Buzzer
Communication Interfaces
Software
Power supply
Estimated Battery Life
Operation Temperature
Casing
Protection Index
Dimensions
Certifications
NOVUS AUTOMATION
Thermocouple J, K, T, N, E, R, S and B, Pt100, 0-50 mV, 0-5 V, 0-10 V, 0-20 mA, 4-20 mA
Logical Levels
Maximum Voltage
Input Impedance
Input Current @ 30 VDC (typical)
Maximum Frequency (squared wave)
Minimum Pulse Duration
Maximum current that can be switched at the output: 200 mA
Date/Time, Start button, digital input or software command
NXperience (By USB or by TCP/IP network for desktops and notebooks)
Power Supply Source
Batteries
Maintenance of batteries is required (typically every 2 years, considering a 5-minute recording interval with
Using Energizer L91 batteries: -20 to 60 °C
Using external power supply: -20 to 70 °C *
CE, FCC, CAN ICES-3 (A) / NMB-3 (A), ANATEL (07034-17-07089)
Table 13 – Technical specifications
LOGBOX WI-FI
3 analog inputs
1 digital input
Internal Temperature (NTC)
Battery Voltage
External Power Supply Source Voltage
Thermocouples / Pt100 / mV: > 2 MΩ
mA: 15 Ω + 1.5 V
V: 1 MΩ
Maximum cable offset resistance: 25 Ω
Excitation Current: 166 µA
Used Curve: α= 0.00385
Logical Level "0": from 0 to 0.5 VDC
Logical Level "1": from 3 to 30 VDC
1 PNP-type output
3 lines, 4½ digits
Analog Signals: 15 bits (32768 levels)
Digital Signal: 16 bits (65536 levels)
140000 logs (total)
1 second to 18 hours
Instant or Medium
8 available alarms, two by channel
Min. (low) and Max. (high)
Yes, it can be used for alarms
USB
802.11b/g/n 2.4 GHz
Maximum Consumption: 15 mA
4 "AA" type alkaline batteries (included) (WiFi
WiFi interface disabled
Using the included batteries: -10 to 50 °C
ABS+PC
IP40
120 x 100 x 40 mm
30 VDC
270 kΩ
150 µA
Dry Contact: 10 Hz
PNP: 2 kHz
NPN: 2 kHz
Dry Contact: 50 ms
PNP: 250 µs
NPN: 250 µs
Voltage: 10 VDC to 30 VDC
Typical Consumption: 2 mA
interface disabled)
50/53