Novus LogBox Wi-Fi Instruction Manual page 26

82 CH1_VALUE
83 CH1_VALUE_MIN
84 CH1_VALUE_MAX
85 CH1_ALARM_MIN_STATUS
86 CH1_ALARM_MAX_STATUS
87 CH1_ALARM_STATUS
89 CH2_STATUS
90 CH2_VALUE
91 CH2_VALUE_MIN
92 CH2_VALUE_MAX
93 CH2_ALARM_MIN_STATUS
NOVUS AUTOMATION
Current value of analogue channel 1.
Minimum value registered on analog channel
1.
Maximum value registered on analog channel
1.
Analog channel 1 minimum alarm status.
Analog channel maximum alarm status 1.
Analog channel 1 current alarm status.
Analog channel status 2.
Analog channel 2 current value.
Minimum value registered on analogue
channel 2.
Maximum value registered on analogue
channel 2.
Analog channel minimum alarm status 2.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
Stores information if the channel
ever reached the minimum
alarm.
0. Never alarmed;
1. Already alarmed.
Stores information if the channel
ever reached the maximum
alarm.
0. Never alarmed;
1. Already alarmed.
0. No alarm;
1. Minimum alarm;
2. Maximum alarm.
1. Ok;
2. Underflow;
3. Overflow;
4. Cold joint error;
5. Open sensor.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
Decimal places:
1. For temperature sensors
and the cold joint;
2. For battery voltage and
external power supply.
For linear sensors, the decimal
point is configured.
26/53