Over The Air (Ota) Firmware Update - Novus LogBox Wi-Fi Instruction Manual

14. OVER THE AIR (OTA) FIRMWARE UPDATE

The LogBox Wi-Fi Wi-Fi module can be upgraded using Over the Air (OTA) technology.
To perform this procedure, you must know the device's IP. After that, you will need to access it through a Browser. In the address bar, you must
enter the device's IP address (192.168.12.33, for example).
Once the Browser loads the device's firmware update page, you will need to upload a .cbin file, which contains the Wi-Fi module's new firmware
version.
The firmware update through this interface has the objective of updating network services such as MQTT, Modbus-TCP, among others. For a
complete upgrade, you must use the NXperience software and update the rest of the device via USB.
Fig. 26 – Firmware update
NOVUS AUTOMATION 47/53