Event Memory; Event Log; Emi/Lightning Transient Protection; Programming - Radionics D7212 Operation And Installation Manual

Event Memory

NCI

Event Log

154

EMI/Lightning Transient Protection

Programming

74-06913-000-B 2/96
The D7212 uses event memory to store events for each area. You can view the events for
an area at a D1255 Command Center assigned to the area. The D7212 panel clears the
events for an area from event memory and starts storing new events when you master arm
the area.
The D7212 stores up to 500 events and event modifiers from all areas in it's event log.
Event modifiers add information about an event to the log. Some events are always
followed by a modifier. For example, the D7212 adds at least two items to the log each
time you arm or disarm an area, the open (or close) event and an event modifier showing
the previous arming state.
All events and their modifiers are stored even if the D7212 does not send a report for them.
You can view the log at a D1255 Command Center, print it locally using the D9131 Parallel
Printer Interface and a parallel printer, or upload it to a D5300 Remote Account Manager II
(RAM II).
See S- View Log in the Security System User's Guide (71-06141-000) for a complete
listing of log events and event modifiers.
The D7212 maintains the Radionics high level of quality and field dependability. Its design
significantly reduces electromagnetic interference and malfunction generally caused by
lightning.
Use either the Radionics D5200 Programmer, or the D5300 Remote Account Manager II
(RAM II) to program the D7212. Refer to the D7212 Prog ram Entry Guide (74-06915-000)
for programming options.
D7212 Operation & Installation Manual
Page 9
© 1993-1996 Radionics