Advertisement
Quick Links
National Security Systems Inc (800)457-1999
D279A
User Guide
General Information
The D279A Independent Zone Control is an arming station that
provides you with control over a specified area of your security
system. The D279A gives you independent control of this area,
regardless of whether the rest of your security system is armed
or disarmed. Features of the D279A include protection status
display indicators, entry and exit delay time, prewarning sounder,
individual zone annunciation, panic alert, and a user-program-
mable passcode.
ZONE CONTROL DISPLAY
DELAYED
INSTANT
SOUNDER
The Zone Control Display
The Zone Control has three protection status display indicators:
a DELAYED loop indicator, an INSTANT loop indicator, and an
ARMED indicator.
DELAYED - When this green indicator is lit, the delay area is
ready to be armed. When the DELAYED indicator is not lit, the
area is not ready to be armed (check doors, windows, and motion
detector vicinities in the delay area).
INSTANT - When this green indicator is lit, the instant area is
ready to arm. When the INSTANT indicator is not lit, the area is
not ready to arm (check doors, windows, and motion sensors in
the instant area). Both the DELAYED and INSTANT indicators
must be lit before arming.
Independent Zone Control
Reference Guide
Area Identification
1
2
ARMED
4
5
7
8
*
D279A Independent Zone Control
REFERENCE GUIDE
DIGITAL
3
KEYPAD
6
9
*
Advertisement
Related Manuals for Radionics D279A
Summary of Contents for Radionics D279A
-
Page 1: D279A Independent Zone Control
Independent Zone Control User Guide General Information The D279A Independent Zone Control is an arming station that provides you with control over a specified area of your security system. The D279A gives you independent control of this area, regardless of whether the rest of your security system is armed or disarmed. - Page 2 Note: If both the DELAYED and INSTANT loops are faulted at the end of the exit delay, an entry delay will be initiated (not an instant alarm). D279A User Guide 46457D Page 2 © 2001 Radionics...
- Page 3 If an alarm occurs and you want to silence the alarm, simply enter your personal passcode. Some security systems do not permit the D279A Zone Control to silence the alarm. If so, the alarm must be silenced from a different control center in your system.
- Page 4 Notes About Programming Your Passcode: • Passcode programming feature must be enabled by the D279A installation company. • Programming must be completed in 60 seconds. • You can only program passcodes while the Zone Control is disarmed and the DELAYED and INSTANT lights are on.