Radionics D269 User Manual

D269

User Guide

General Information
Your Model 269 Independent Zone Control is an arming station
that provides you with control over a specified area of your security
system. The 269 gives you independent control of this area,
regardless of whether the rest of your security system is armed
or disarmed.
Features of the Model 269 include protection status display
indicators, entry and exit delay time, prewarning sounder and
user programmable passcode.
The Zone Control Display
The Zone Control has two protection status display indicators: a
STATUS indicator and an ARMED indicator.
STATUS
When the green indicator is lit, the specified area is ready to be
armed. When the green indicator is not lit, there is a faulted
sensor in the specified area. Correcting the fault usually means
closing a door or a window.
ARMED
When the red indicator is lit, the area is armed. When the red
indicator is not lighted, the area is not armed.
The Keypad
The Zone Control has a digital keypad used to enter your
personal passcode into the security system. It is your personal
passcode which arms and disarms the specified area.
When entering your passcode, if the Zone Control emits a short
warning tone each time you touch a key, check the STATUS
light, as this indicates a problem with a device in the protected
area.
Arming the Specified Area
1) Ensure that the specified area is secure. The green
STATUS indicator light must be on.
2) Enter your personal passcode. The red ARMED indicator
light flashes on and off to indicate exit delay time
(approximately 60 seconds). When the ARMED indicator
lights steadily, the specified delay area is armed.
Independent Zone Control
R