Summary of Contents for Sunny Health & Fitness SF-E3626
Page 1
EZ STRIDE MOTORIZED ELLIPTICAL SF-E3626 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE RETURN UNTIL HAVE CONTACTED support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
Thank you for purchasing the EZ Stride Motorized Elliptical. Please read the operating instructions carefully before use, especially the safety precautions. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER –...
Page 3
17. To reduce the risk of injury, do not use the appliance if the surface is wet. If the appliance surface becomes wet, dry the surface before using. 18. Turn off the power after each use. After using or before cleaning the appliance, unplug the power supply from the outlet.
Page 5
CONTROL PANEL FEATURES Power Turns elliptical ON and OFF Manual Exercise Selects Manual Exercise setting Changes resistance from LO to MI to HI Auto Selects Auto Exercise setting Exercise Changes speed from LO to MI to HI Power is Mode Selects Mode setting Changes mode...
OPERATING INSTRUCTIONS 1. Plug in the elliptical. 2. Press Power button to turn on the power. 3. Select one of the following modes: AUTO EXERCISE Press Auto Exercise. The pedals will rotate forward starting at LO speed. Press Auto Exercise to increase speed to MI. Press Auto Exercise to increase speed to HI.
FEATURES AUTO SHUT-OFF The elliptical automatically shuts off after 30 minutes. When there is 1 minute remaining, the elliptical will beep. Press Auto Exercise, Manual Exercise or Mode button to restart the timer at 30 minutes and continue exercising. PEDOMETER The display will count steps.
TROUBLESHOOTING If you have problems when using this product, refer to the following tips and possible solutions. POSSIBLE CAUSE SOLUTION Not powered Product does 1. Make sure power cord is Power switch is not not turn on plugged in turned on 2.