Operating Equipment Safely - Progressive Turf Equipment Pro-Flex 120 Operators Manual & Parts Lists

Pro-Flex 120 Series Operator's Manual

Hydraulic circuits to control mower functions must be set to
2000psi maximum working pressure.

OPERATING EQUIPMENT SAFELY


Never allow persons to stand between power unit and mower
while backing power unit up to hitch the mower.

Before hitching mower to power unit, place transmission in
neutral, set park brake, and turn engine off.
ignition key.

Make sure locking collar on PTO shaft is properly locked. If the
PTO shaft comes off during operation, personal injury or
equipment damage could result.

Tall grass can hide obstacles. Carefully walk the entire area to
be mowed beforehand. Look for debris, rocks, tree limbs etc.
that will damage or be thrown by the mower blades. Identify
objects that cannot be removed. Set mower cutting height to
avoid contact.

Ensure that no bystanders are within 10 ft of mower when wing
transport locks are released.

Keep all bystanders well away from the machine when it is
operating. Always maintain a safe operating distance from
personnel, other equipment, or vehicles.

Never operate the mower with deflectors or guards removed.
Mower blades can cause small objects and debris to be thrown
from under the mower deck at high speeds, up to 300 ft away.
Objects ejected by the mower blades can cause severe injury.

Never tamper with safety devices or operate the mower with
them removed. Check proper operation regularly.

Always disengage PTO, place all controls in neutral, turn power
unit off, set parking brake, and remove key before dismounting,
for any reason.

Never place hands or feet under mower deck when the mower
is operating or power unit engine is running.

Disengage the PTO when crossing gravel areas or roadways.

Disengage the PTO and turn power unit off upon striking any
object. Inspect mower and repair any damage before
continuing.

If the equipment should start to vibrate abnormally during
operation, stop the mower, shut down power unit, and
immediately check for the cause. Excess vibration is generally
an indication of a problem. Replace bent or damaged parts, do
not attempt to straighten a bent blade.

Use extreme care when operating on uneven terrain.

Reduce speed when operating on slopes during wet conditions,
especially when making sharp turns.

Do not use the mower in limited visibility (e.g. at dusk, in fog,
heavy rain etc.). Mow only in daylight or good artificial light.

Disengage PTO and ensure blades are completely stopped
before raising wings.
12
Remove the