Trouble Shooting - Progressive Turf Equipment SDR-90 Operators Manual And Parts Lists

TROUBLE SHOOTING:

PROBLEM
Belt slippage
Rapid belt wear
Belt squeal
Over-heated bearings
Input shaft does not
collapse easily on
turning.
Premature spindle
bearing failure.
CAUSE
Lack of tension
oily drive conditions
Belt slippage
belt not in proper
groove
Belt slippage
Belt slippage
excessive drive tension
Lack of grease at
intermediate location of
drive shaft
Lack of lubrication or
grease is contaminated
29
REMEDY
Increase tension
Clean up drive
Increase tension
Place in proper groove
Increase tension
Increase Tension
Tension drive properly
Remove driveshaft and
pull apart. Grease
splines. Grease every 8
hours.
See grease information
and ensure grease being
used is compatible.
Grease per instructions