Table of Contents
Advertisement
D:\Sony\#Work\880191S_XM-GS6DSP(UC)\4733364111\4733364111XMGS6DSPUC\01GB-
XMGS6DSPUC\040CD.fm
010COV.book Page 5 Wednesday, November 1, 2017 4:27 PM
Operation
Location and Function of Controls
Control panel side
Connector panel side
POWER/PROTECTOR indicator (green)
– Lights up when the unit is turned on.
– Flashes when the unit detects an abnormality.
See "Troubleshooting" (page 21) for solutions
to problems.
PAIRING button
Press and hold for 2 seconds to enter the pairing
standby mode.
Press and hold for 7 seconds to turn off the
BLUETOOTH functions (BLUETOOTH off mode).
(Available only when the SELECT switch is set to
the "2V" or "5V" position.)
(BLUETOOTH) indicator (blue)
– Flashes quickly in pairing standby mode.
– Flashes slowly in BLUETOOTH standby mode.
– Lights up when BLUETOOTH connection is
established.
RESET button
Resets the unit to the factory defaults (the DSP
settings and BLUETOOTH pairing information
stored on the unit are also erased).
Press with a pointed object such as a ballpoint
pen.
SELECT (input select) switch
Selects "2ch/BT" or "6ch" mode depending on
the use/non-use of the DSP. When selecting the
"2ch/BT" mode, also select the sensitivity "2V"
or "5V" depending on the pre-output level of
your car audio unit (page 10).
TWEETER/FRONT (tweeter/front speaker)
section:
HIGH PASS FILTER switch
Turns the high-pass filter on/off.
HIGH PASS FILTER control
Adjusts the cut-off frequency (500 Hz – 4 kHz).
LEVEL control
Adjusts the input level (0.3 V – 6 V). Turn it
clockwise when the output level of the audio
device seems low.
masterpage: Right
5
GB
XM-GS6DSP
4-733-364-11(1)
Advertisement
Table of Contents
