Table of Contents
Advertisement
D:\Sony\#Work\880191S_XM-GS6DSP(UC)\4733364111\4733364111XMGS6DSPUC\01GB-
XMGS6DSPUC\040CD.fm
010COV.book Page 22 Wednesday, November 1, 2017 4:27 PM
The sound is muffled.
Check that the filter settings and the cut-off
frequency adjustment are appropriate according
to the speaker system. For details, see "Input
connections" (page 10) and ""Speaker
connections" (page 14).
The sound is too quiet.
The LEVEL adjustment control is not appropriate.
Turn the LEVEL adjustment control in the
clockwise direction.
BLUETOOTH function
The
indicator does not light up.
The selected connection mode on the unit is not
appropriate.
– Check that the SELECT switch is set to the "2V"
or "5V" position.
This unit cannot be detected from BLUETOOTH
devices.
Press PAIRING to set this unit to pairing standby
mode before pairing the BLUETOOTH devices.
This unit may not be detected from a BLUETOOTH
device already connected to other BLUETOOTH
devices.
– Operate the BLUETOOTH device to release the
connections with other BLUETOOTH devices,
then search for this unit.
If the device is already paired, detect this unit
from the BLUETOOTH device while the
indicator on the unit is flashing quickly.
Connection is not possible.
The connection is controlled from the
BLUETOOTH device.
– Operate the BLUETOOTH device to connect to
this unit.
The device name of this unit does not appear.
Depending on the status of the BLUETOOTH
device, it may not be possible to obtain the
device name of this unit.
The volume of the connected BLUETOOTH device
is low (high).
Volume level will differ depending on the
BLUETOOTH device.
– Adjust the volume of the connected
BLUETOOTH device or this unit.
22
GB
The sound skips during playback of a
BLUETOOTH device.
Reduce the distance between this unit and the
BLUETOOTH device.
If the BLUETOOTH device is inside a case which
interrupts the signal, remove the case from the
BLUETOOTH device during use.
Several BLUETOOTH devices or other devices
which emit radio waves are in use nearby.
– Turn off the other devices.
– Increase the distance from the other devices.
The playback sound stops momentarily when the
connection with the cellular phone is being made
on the BLUETOOTH device. This is not a
malfunction.
This unit cannot be controlled from the
BLUETOOTH device.
Check that the connected BLUETOOTH device
supports AVRCP.
Some functions do not work.
Check that the connected BLUETOOTH device
supports the functions in question.
Pairing failed due to a timeout.
Depending on the connecting BLUETOOTH
device, the time limit for pairing may be short.
– Try completing the pairing within the time.
Cannot pair.
If the pairing information of the unit is on the
connecting BLUETOOTH device, the unit may not
be able to pair with a previously paired
BLUETOOTH device after initializing the unit. In
this case, delete the pairing information of the
unit from the BLUETOOTH device, and then pair
them again.
BLUETOOTH function cannot operate.
Turn off the car audio unit, then turn the car
audio unit on again.
Sony | Music Center operation
Application name does not match the actual
application in "Sony | Music Center".
Launch the application again from the "Sony |
Music Center" application.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
masterpage: Left
XM-GS6DSP
4-733-364-11(1)
Advertisement
Table of Contents
