Operation; Location And Function Of Controls - Sony XM-S400D Operating Instructions Manual

Operation ·
Location and Function of Controls
[I]
POWER/PROTECT indicator
Lights up in green during operation.
If the protection circuit activates, the POWER/
PROTECT indicator flashes. For details, see
"Troubleshooting" (page 12).
[2]
SIGNAL INPUT connector
Can be connected with the supplied RCA input
cord or high level input cord.
~
INPUT SELECT switch
Sets the input signal to "2CH" or "4CH."
@]
REAR LPF (low-pass filter) switch
Sets the low-pass filter (LPF) to "ON" or "OFF."
[§]
FRONT HPF (high-pass filter) switch
Sets the high-pass filter (HPF) to "ON" or "OFF."
[§]
Slit for the supplied bracket
Insert the bracket and secure with the screw to
mount the unit on the mounting board or flat
surface.
[1]
Fuse holder (15A)
When replacing the fuse, be sure to use one
with 15 A.
[ID
POWER/OUTPUT connector
Can be connected with the supplied power
connection cable.