Safety Option Customization - Danfoss VLT Safety Option MCB 150 Installation Manual

Installation Guide | VLT® Safety Option MCB 150/151
• Feasibility of the configuration data.
• Proper wiring.
• Correct device number (ordering number). If the self-test is successful, the power element of the drive is enabled.
Up to 10 s may elapse before the safety option is ready for operation.

5.2.3 Safety Option Customization

The following LCP messages indicate the different states of the customization process.
LCP message
Status
!1(1)
0 R PM None 0.00 KW
SO C us tom. requested
!Safe Stop [W68]
Status
!1(1)
0 RPM None 0.00KW
SO Custom. aborted
SO RESET required!
!Safe Stop [W68]
Off Remote SO Req.RESET
Status
!1(1)
0 RPM None 0.00KW
SO Custom. completed
SO RESET required!
!Safe Stop [W68]
Off Remote SO Req.RESET
54 | Danfoss A/S © 2018.09
N O T I C E
Description
MCT 10 customization of the safety option is requested.
MCT 10 customization of the safety option is aborted.
MCT 10 customization of the safety option is complete.
Commissioning
AQ279747441421en-000101 / 130R0292