Measurement Computing PCI-DAS6034 User Manual page 20

PCI-DAS6034 & PCI-DAS6035 User's Guide
I/O Type
AUXIN<5:0> A/D CONVERT
Sources
A/D EXT. TIMEBASE IN
(SW selectable)
A/D START TRIGGER
A/D STOP TRIGGER
A/D PACER GATE
D/A START TRIGGER
D/A UPDATE
D/A EXT. TIMEBASE IN
AUXOUT<2:0 STARTSCAN
> Sources
SSH
(SW selectable)
A/D STOP
A/D CONVERT
SCANCLK
CTR1 CLK
D/A UPDATE
CTR2 CLK
A/D START TRIGGER
A/D STOP TRIGGER
D/A START TRIGGER
Default AUXIN0:
Selections
AUXIN1:
Summary:
AUXIN2:
AUXIN3:
AUXIN4:
AUXIN5:
AUXOUT0:
AUXOUT1:
AUXOUT2:
Table 4-1. Auxiliary I/O Signals
Signal Name
External ADC convert strobe (default)
External ADC pacer time base
ADC Start Trigger (default)
ADC Stop Trigger (default)
External ADC gate (default)
DAC trigger/gate (default) (PCI-DAS6035 only)
DAC update strobe (default) (PCI-DAS6035 only)
External DAC pacer time base (PCI-DAS6035
only)
A pulse indicating start of conversion
An active signal that negates at the start of the last
conversion in a scan.
Indicates end of an acquisition sequence
ADC convert pulse (default)
Delayed version of ADC convert (default)
CTR1 clock source
D/A update pulse (default) (PCI-DAS6035 only)
CTR2 clock source
ADC Start Trigger Out
ADC Stop Trigger Out
DAC Start Trigger Out
A/D CONVERT
A/D START TRIGGER
A/D STOP TRIGGER
D/A UPDATE (PCI-DAS6035 only)
D/A START TRIGGER (PCI-DAS6035 only)
A/D PACER GATE
D/A UPDATE (PCI-DAS6035 only)
A/D CONVERT
SCANCLK
4–2
Functional Description
Function