Part Names And Functions - Pro-face GP-2401T User Manual

Chapter 2 - Specifications
2.4

Part Names and Functions

A,B
D
(GP-2501T/GP-2501S/GP-2601T)
D L
2-8
C
Front
E
F G
Rear
H
E F
J M K G
Rear
(GP-2401T)
A: Display Panel
The GP monitor screen displays the screen
setup and corresponding host (PLC) data.
GP-2401T TFT type color LCD
GP-2501T TFT type color LCD
GP-2501S STN type color LCD
GP-2601T TFT type color LCD
B: Touch Panel
Performs any screen change operations and
sends data to the PLC.
C: Status LED
This LED reflects the GP's condition.
Color
No power input
OFF
Normal operation
Green
Backlight is burned out
Orange
D: Power Input Terminal Block
Connects the power cord.
E: Expansion Unit Interface (EXT1)
Not available (Pro-Designer does not sup-
port this interface.)
F: CF Card Cover
Open this cover to the CF Card Slot. When
accessing the CF Card, this cover must be
closed.
The GP cannot access the CF
Card if the CF Card cover is al-
ready opened.
G:CF Card Access Lamp
If the CF Card Cover is closed when the
CF Card is inserted, the LED lamp turns
ON. The LED lamp will remain turned ON
even if the CF Card Cover is opened while
the GP accesses the CF Card.
GP-2401/2501/2601 Series User Manual
Indicates