Revision Version; Documentation Conventions - Pro-face GP-2401T User Manual

Revision Version

The revision version can be determined by the identification label or revision
stickers that are placed on the main unit of the GP. The characters and numerals in
the "REV" area that are replaced with asterisks (*), or marked with a marker
indicate the revision version.
In the example below, the asterisks "*" are placed at positions "D", "1", and "2",
which indicates the revision version as "D, 1, 2".

Documentation Conventions

The list below describes the documentation conventions used in this manual.
Screen
GP-2401/2501/2601 Series User Manual
DIGITAL ELECTRONICS CORP.
Identification Label
Symbol
Indicates important information or procedures that must be followed for
correct and risk-free software/device operation.
Indicates useful or important supplemental information.
*1
Indicates steps in a procedure. Be sure to perform these steps in the
1) , 2)
order given.
Refers to useful or important supplemental information.
Provides useful or important supplemental information.
Indicates the Pro-Designer (version 4.0 or higher).
Editor
Abbreviation for Programmable Logic Controller.
PLC
Indicates a multi-link type connection is used.
n:1
Revision Sticker
Description
Preface
13