Table of Contents
Advertisement
1.2
Accessories
All optional equipment listed here is produced by Digital Electronics Corporation.
Available Software
Product Name
Pro-Designer
Ver. 4.0 or later
Tool Connector
Product Name
Screen Data
Transfer Cable
Serial Interfaces
Product Name
RS-232C cable
RS-422C cables
RS-422 Connector
Terminal Adapter
2 Port Adapter II
2 Port Adapter II Cable
Mitsubishi A Series
Programming Port I/F
cable
Mitsubishi FX Series
Programming Port I/F
cable
*1 For detailed information about the range of connectable PLC manufacturers and
models,
GP-2401/2501/2601 Series User Manual
Model No.
PS-DWE01-V40
Model No.
GPW-CB02
Model No.
GP410-IS00-O
*1
GP230-IS11-O
*1
GP070-CN10-O
*1
GP070-MD11
GP070-MDCB11
GP430-IP10-O
GP430-IP11-O
Pro-Designer On-line Help
Chapter 1 - Introduction
Description
Software to be used to create the screen
data. Installed in a personal computer.
Description
Connects the GP to a personal computer.
Transfers screen data and user
program(s).
Description
Interface cables between the host (PLC)
and the GP.
Conversion adapter to convert serial data
to RS-422 format
Interface unit that allows use of both GP
and Mitsubishi A, Q, C and FX series
peripheral equipment.
Connects the GP to 2 Port Adapter II.
Connects directly to Mitsubishi's PLC
Programming port. Simultaneous use of
programming console, however, is not
possible.
1-3
Advertisement
Table of Contents
