Orientalmotor OPX-2A Operating Manual page 29

Use
to navigate
through the items.
Driver input terminal X0
Driver input
terminal X1
Driver input
terminal X2
Driver input
terminal X3
Driver input
terminal X4
Driver input
terminal X5
Driver input
terminal X6
Driver output
terminal Y0
Driver output
terminal Y1
Driver input terminal X0
Alarm/warning parameters
Use
to navigate
through the items.
Overload warning level
Overload warning
function
Initial
Setting range
value
1
2
0: None
1: FWD input
6
2: REV input
3: M0 input
4: M1 input
3 5: M2 input
6: STOP-MODE input
7: ALARM-RESET input
8: EXT-ERROR input
7
9: MB-FREE input
10: TH input
9
10
0: none
1: MOVE output
6
2: VA output
3: ALARM-OUT2 output
4: WNG output
5: ALARM-OUT1 output
5
6: SPEED-OUT output
7: TLC output
∗ If same values are assigned, priority will be given in the order of X0
terminal.
Initial
Setting range
value
100 50 to 100 [%]
0: Disable
0
1: Enable
Set the functions to be
assigned to the X0 to X6 input
signals.
Set the functions to be
assigned to the Y0 and Y1
output signals.
Description
Set the detection level (load factor) of the
∗
overload warning function. The rated
torque being 100%.
Enable/disable the overload warning
function.
8 Parameter mode
Description
∗
∗ Setting unit: 1
−29−