Orientalmotor OPX-2A Operating Manual page 18

6 Monitor mode
Present warning
I/O monitor
You can check the ON/OFF status of each I/O signal of the driver (Lit: ON, Unlit: OFF).
Use the
Top screen of the I/O monitor
• Monitoring the I/O
On the monitor screen of the user I/O, Each digit on the 7-segment LED display corresponds to a signal.
If the signal is ON, the corresponding digit is lit. If the signal is OFF, the digit is unlit.
• Input monitor
• Voltage monitor of external speed setting
(display unit: V)
−18−
Use
to navigate
through the items.
Warning record 1 (latest)
Warning record 2
Warning record 10 (oldest)
Warning reset
Warning record 1 (latest)
∗ If operations are limited by the edit lock function (p.7), the screen text in gray is not shown.
keys to select the input signals or output signals.
Use
to navigate
through the items.
Input monitor
Output monitor
Voltage monitor of
external speed setting
Input monitor
X6 input
X0 input X5 input
X1 input X4 input
X2 input X3 input
Warning is being reset
(blinking display)
• Output monitor
When setting the speed by means of external DC
voltage, you can monitor whether voltage is input.
If 10 VDC is selected, a value corresponding to one
half the input voltage is displayed.
Y1 output
Y0 output