Data Mode; Operation In The Data Mode - Orientalmotor OPX-2A Operating Manual

7 Data mode

Up to eight sets of operation data can be set. Also the limit value of the motor output torque can be set in
operation data.
Once set, the operation data is stored in the driver. The data will not be lost even after the OPX-2A is
disconnected from the driver.
Before setting operation data, read the BLE Series standard type and electromagnetic type OPERATING
MANUAL carefully to understand the basic operations, functions and other details of the driver.
•
Note
•

7.1 Operation in the data mode

1.
Use the
2.
Press the
3.
Use the
4.
Press the
The display changes to the operation data setting screen.
5.
Use the
6.
Pressing the
display to the operation number selection screen.
Top screen of data mode
Operation data have significant bearing on motor operation. Before setting any
operation data, make sure you fully understand the content of the data.
If operations are limited by the edit lock function (p.7), the operation data is not edit.
key to select the data mode.
key in the top screen of the data mode
keys to select the operation data number.
key.
key to select the item you want to set.
key on the screen showing the last operation data item will return the
Operation data number 0
Operation data
number 7
Use to input a
value between 0 and 7.
Use to move
to the next item.
Rotating speed
Torque limit
Acceleration time
Deceleration time
7 Data mode
−19−