Connecting Gasclam 2 To A Pc; Home Window - ION GASCLAM 2 Software Manual

GasClam 2 Software Manual

2. Connecting GasClam 2 to a PC

WARNING: Do not connect or disconnect any cables in hazardous areas and do not use non-approved
equipment in hazardous areas such as laptops, notebooks and mobile phones.
2.1.1. Connecting to a GasClam 2
Whilst the GasClam 2 is outside the hazardous area it can be programmed using a computer with the GasClam 2
software. Use the Serial Communication Cable (supplied) and an RS232-USB converter (not supplied) (The RS232
convert may need to install drivers the first time it is connected to the computer).
1) The GasClam 2 must have a charged battery inserted. (See
User Manual to change batteries correctly)
2) Remove the cap from the GasClam 2 Com Port and carefully
connect the Serial Communication Cable ensuring that the two red
dots are aligned, then push for a firm click.
3) Connect the Serial Communication Cable to the RS232
converter and connect to the USB port of the computer.
4) Start the GasClam 2 software using the shortcut icon.
5) The software will start in the "Home" window.
2.1.2. Disconnecting from a GasClam 2
When finished close the software, disconnect the Com Cable and replace the
Com Port Cap on the GasClam 2.

3. Home Window

The GasClam 2 Home window displays the current status of the GasClam 2 and shows the recorded values from
the last sample taken. Buttons are provided to access further features including Logging Setup.
GasClam 2
"friendly name"
Logging Setup
GasClam
Status Box
Logging
"Start/Stop"
Unrivalled Detection.
Error Notification
Version Numbers
ionscience.com
Ion Science Ltd.
Box
Last Reading
Stored Box