ION GASCLAM 2 Software Manual page 20

GasClam 2 Software Manual
If an error occurred during sampling a yellow warning triangle will appear in the first column and moving the
mouse over the error will show a tooltip with a description of the error or errors if there are more.
The data is shown in columns with the following information and formats, if certain sensors or the water level
sensor are not installed, the data is not logged and will not appear in the "Sampling Data".
Information
Date
CH4 (Methane)
CO2 (Carbon Dioxide)
O2 (Oxygen)
VOC (Volatile Organic Compound)
H2S (Hydrogen Sulphide)
CO (Carbon Monoxide)
Bore Pres
Atm Pres
Diff Pres
C
Water Level
Battery
Filter Pres
Unrivalled
Detail
The date is shown in the format dd.mm.yyyy.hh:mm
The specific type of sensor and range is shown – values (%)
The specific type of sensor and range is shown – values (%)
The specific type of sensor and range is shown – values (%)
The specific type of sensor and range is shown – values (ppm)
The specific type of sensor and range is shown – values (ppm)
The specific type of sensor and range is shown – values (ppm)
Borehole Pressure – values (mBar)
Atmospheric Pressure – values (mBar)
Differential pressure between Borehole ad Atmosphere – values (mBar)
If the value is negative it means the pressure in the borehole is lower than atmospheric and if the
pressure is positive it is higher than atmopheric
GasClam2 internal temperature – values C
If there are no great fluctuations during the loggin interval then the value will equate to the
actual Borehole temperature.
The depth of the water table below ground level in metres – values (mbg)
The voltage of the internal battery or external power supply – values (V)
The voltage recorded is the voltage under maximum load during sampling.
The depth of the water table below ground level in metres – values (mbg)
Detection. ionscience.com
Ion Science Ltd.