Selecting A Data File To View; View Logging Data - ION GASCLAM 2 Software Manual

Continuous ground gas monitoring

Table of Contents

GasClam 2 Software Manual

It is possible to order the data according to each individual parameter by clicking the column header. The selected

column and order is indicated by an arrow in the column header, the first click arranges data in ascending order

[▲] and another click arranges data in descending order [▼].

7.1. Selecting a Data File to View

There are several ways to open downloaded ".GCL" logging data files for

viewing:

Double click directly on the downloaded ".GCL" data file in the

download folder which will open the "ViewData" window with the

logging data.

Start the GasClam 2 software and click the "View Data" button in the

home window. This will open the "ViewData" window. Click the "..."

button and select the required folder and file to view the logging data.

Straight after downloading is complete click the "View Data" button. In the

"ViewData" window "File Name" bar the current downloaded file will be

visible. Click "Open" to view the logging data.

The "..." button is used to select the folder for the required data file.

The "Open" button will open the data file that is shown in the "File Name" bar,

if a file is not selected and visible in the "File Name" bar then it can also be

used to find a folder and data file.

7.2.1. Sampling Data Tab

The data file that has been selected opens in the "Sampling Data" tab. This shows all the readings for each sample

that was taken during the logging run (or runs if a combined data file was selected).

Unrivalled

Detection.

ionscience.com

Ion Science Ltd.

Table of Contents