Table of Contents
Advertisement
6. Using the Tiger XTL PC Software and Downloading Data
The Tiger XTL PC software enables you to fully configure the instrument.
PC Requirements
Tiger XTL PC Software must be used in conjunction with a PC or laptop using Windows 10.
Installation of Tiger XTL PC Software
Download the Tiger XTL PC software from the
Run setup.exe to install the software.
Alternatively, the Tiger XTL PC software can be purchased on a memory stick.
Follow the prompts until the installation is complete. Should you have difficulty, please contact your
local distributor, or contact ION Science directly.
Connecting a TIGER XTL to a PC
The TIGER XTL must be functionally checked prior to entering a hazardous area
after every occasion when a connection has been made to the USB port. The
instrument must complete its start-up routine and display legible readings. If the
LCD display fails to show an intelligible and uncorrupted display the instrument
must not enter a hazardous area.
Connect your TIGER XTL to the PC. The (type B) USB port of the TIGER XTL is located at the back of
the instrument, above the charging connectors.
While the TIGER XTL is connected, the instrument will go into Sleep Mode
PC. The instrument will "awaken" when it is disconnected.
Pioneering Gas Sensing Technology.
TIGER XTL Instrument User Manual V1.0
ION Science
website.
Page 22 of 56
if set to do so in Tiger XTL
ionscience.com
Advertisement
Table of Contents
