Troubleshooting; Transportation, Storage And Disposal - Husqvarna MS 610 G Operator's Manual

Troubleshooting

WARNING: The user must only do the
service work described in this operator´s
Trouble (MS 610)
Motor stops during operation.
Transportation
CAUTION: Secure the product during
transportation in order to avoid transport
damage and accidents.
• Remove the blade before transportation of the
product.
• Inspect new blades for transport damage.
• Transport the product and fuel so that there is no risk
of any leakage. Make sure that fumes can´t come
into contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/ switches or boilers.
• Observe care when lifting. You are handling heavy
parts, which imply the risk of pinch injuries or other
injuries.
• Stop the engine before lifting or moving the product.
Empty the water tray through the hole in the bottom
of the water tray.
271 - 002 - 12.06.2018
Troubleshooting

Transportation, storage and disposal

manual. More extensive work must be done
by an authorized service workshop.
Solution
1. Do a check of all electrical connections. If they are
damaged, contact a qualified electrician.
2. The manual overload switch has been tripped: Singel
phase 60Hz motors have a manual overload reset but-
ton. If the motor stops because of an electrical overload
and the overload reset button trips, turn the motor power
switch to the OFF position. Allow the motor to cool for 5
to 10 minutes and then push the reset button. A click in-
dicates that the motor is reset and ready for operation.
Restart the motor by turning the power switch to the ON
position.
• Lift the product by forklift using the lifting brackets.
Storage
• Remove the blade before storage of the product.
• Inspect the blades for storage damage.
• Store the blade in a dry place.
• Store the product and fuel so that there is no risk of
any leakage. Make sure that fumes cant come into
contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/ switches or boilers.
21