Advertisement
®
Advanced Energy
Selecting Configuration
Figure 6. Select configuration
Each configuration name, status, and selection is described in the following table:
Table 5. Configuration
Name
Control of validity
Motorpotentiometer =
Master
Setpoint Error
Local remote
configuration
57010166-00A
Status/Selection
Cyclic telegram valid
only if bit is set
Motorpotentiometer =
Master
Zero
Last valid master
setpoint
Last valid error setpoint
Unchanged behavior
Automatic switch to local The unit will automatically switch to local mode when
Ignore master in local
Thyro-PX
Thyro-PX
Description
When enabled, the cyclic telegrams received from the
master will only be considered as valid and processed
if bit 15 of the Device Command (API # 41) is set.
This function allows several settings to be changed one
after another before enabling the complete change,
thereby avoiding unwanted effects due to an
incomplete change.
When enabled, the value of the motorpotentiometer
continuously follows the master setpoint while in
remote operation, so that no setpoint leap occurs
during the switch-over to the local setpoint.
Zero is used as the setpoint when the master setpoint is
missing.
The last valid master setpoint is used as the setpoint
when the master setpoint is missing.
The last valid error setpoint is used as the setpoint
when the master setpoint is missing.
Configuration of the master's influence to the local
remote behavior.
the communication with master is interrupted.
When the unit is in local mode, data and commands
from the master will be ignored.
™
®
Anybus
Modbus TCP
™
®
Anybus
Modbus TCP
6
Hide quick links:
Advertisement
