Advanced Energy Thyro-PX Anybus Modbus TCP Manual page 4

®
Advanced Energy
Figure 2. Menu tree
Anybus Parameter Group
When the computer is connected to the Thyro-PX power controller, the Anybus parameter group will
be added to the parameter list after updating the hardware configuration, as shown in the previous
figure.
If the unit is not available for online configuration, the software can also be configured offline.
Contact AE Global Services to obtain a parameter file appropriate to your hardware configuration.
Figure 3. Anybus parameter group
Configuring Modbus TCP IP Address
Set the Modbus TCP IP address in the submenu Modbus_TCP. By default, the IP address is
automatically assigned through the Dynamic Host Configuration Protocol (DHCP) server.
57010166-00A
™ ®
Thyro-PX Anybus Modbus TCP
™ ®
Thyro-PX Anybus Modbus TCP
4