Fast Process Data Communication - Advanced Energy Thyro-PX Anybus Modbus TCP Manual

®
Advanced Energy
2. Unpack each optional module at an ESD safe work space.
3. Plug each optional module into the unit.
When an Anybus module is inserted into the unit, guide the module towards the left during
insertion.
4. Secure each module with the two TORX
If an Anybus module must be removed from the unit, loosen the TORX T8 mounting screws 3 turns,
and pry out the module with a small flat-bladed screwdriver, as shown in the following figure.
Figure 7. Anybus module removal

FAST PROCESS DATA COMMUNICATION

For fast communication, some process data are buffered in the communication module. To read or
write a buffered parameter, use the address in the following tables, rather than the API associated
address in table
☞
Important
The parameter assigned to each address changes depending on how the Thyro-PX power
controller is configured.
Buffered Read Addresses
The parameter assigned to each address changes with each of the following configurations:
• Single-phase (1 * 1 phase)
• 2x single-phase (2 * 1 phase)
• 3x single-phase (3 * 1 phase)
• Three-phase economic circuit (two phase) (1 * 2 phase)
57010166-00A
"Modbus TCP Parameter List"
Thyro-PX
Thyro-PX
®
T8 screws provided with the module.
on page 13.
™ ®
Anybus Modbus TCP
™ ®
Anybus Modbus TCP
9