Canon K1 Service Manual page 32

4
Installation > Installation Procedure
15) Open the guide, and install the 2 screws.
• 2 Screws (Binding; M4x8)
x2
16) Secure the Left Rear Cover and the Buffer Pass Unit together.
• 1 Screw (TP; M3x16)
4 Installation > Installation Procedure
17) Close the guide.
18) Close the Front Cover.
19) Connect the harness to the host machine, and install the Reuse Band.
20) Connect the 2 connectors, and route the harness along the Harness Guide.
F-4-20
F-4-21
4-8
Reuse Band
F-4-22
x2
F-4-23
4-8