Controls; Decurler/Compression Amount Control; Overview - Canon K1 Service Manual

2
Technology > Controls > Decurler/Compression amount control > Overview

Controls

Decurler/Compression amount control

■ Overview

Upward curl of paper received by the Staple Finisher-M1/Saddle Stitch Finisher-M1 is
corrected by applying pressure (controlling the compression amount) to a fed sheet of paper
using the Decurler Roller and the Hard Roller.
NOTE: Related service mode
COPIER > OPTION > FEED-SW > DCL-FACE
Selection of decurler control:1-/2-sided
COPIER > OPTION > FEED-SW > DCL-ADJ
Adjustment of decurl correction level
2 Technology > Controls > Decurler/Compression amount control > Overview
Decurler Adjustment Cam
Adjustment member
Decurler roller
F-2-3
Driving the Decurler Motor rotates the Decurler Adjustment Cam (operates the compression
amount adjustment member), which changes the amount of pressure (compression amount)
applied by the Decurler Roller and the Hard Roller.
Decurler
Adjustment Cam
2-3
compression amount
adjustment member
F-2-4
2-3