Sata Support; Ethernet Controllers - NXP Semiconductors QorIQ T1040 User Manual

QSGMII
QGMII
MDIO/MDC
T1040
EMII
QSGMII
QGMII

2.6.4 SATA support

SATA may be evaluated through an onboard SATA connector.

2.7 Ethernet controllers

The T1040 SoC supports two Ethernet controllers (EC), which can connect to the
Ethernet PHYs using the MII or RGMII protocols. On the T1040RDB board, the EC1
and EC2 ports operate in the RGMII mode only. Both ports connect to the Realtek
RTL8211 PHYs. The T1040RDB board supports energy efficient Ethernet on EC1 and
sleep mode on EC2.
The figure below shows the connectivity of the EC1 and EC2 interfaces.
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
Freescale Semiconductor, Inc.
F104S8A
F104S8A
Figure 2-7. QSGMII connection
Transformer
Transformer
Chapter 2 Architecture
RJ-45 Port
RJ-45 Port
23