Table of Contents
Advertisement
2. Setup
Using the Board under Linux
Using the Standard COM Driver Software COM Setup Disk
You can perform application program development using the "Standard COM Driver Software -
COM Setup Disk" in the supplied CD-ROM. The procedure for using the software is described in the
\Linux\Readmee.htm file.
See also the following parts of this manual as required.
This chapter Step 1 Setting the Hardware
Operating Systems Other than Windows or Linux
Refer to the following if using on an OS other than Windows or Linux.
This chapter Step 1 Setting the Hardware
Chapter 4 Functions
Chapter 6 About Hardware
10
COM-1(LPCI)H, COM-2(LPCI)H, COM-4(LPCI)H
Advertisement
Table of Contents
