Threading Upper Thread; Adjust The Stitch Length; Stitching And Reverse Stitching - Garudan GF-3131-447 MH User Manual

© ANITA
15. T HREADING UPPER THREA HREADING UPPER THREA D
Before wear line please let take -
lever rose to the highest position, lever rose to the highest position,
so easy to thread and can prevent so easy to thread and can prevent
the start sewing line fall from the the start sewing line fall from the
pinhole. See Fig. (12).
16. ADJUST THE STITCH LE ADJUST THE STITCH LE NGTH
Push the button (2) of needle gauge, rotate the dial (1). Make sure the number (2) on the dial (1) Push the button (2) of needle gauge, rotate the dial (1). Make sure the number (2) on the dial (1) Push the button (2) of needle gauge, rotate the dial (1). Make sure the number (2) on the dial (1)
align to the vertical line of the button. align to the vertical line of the button. See Fig. (13).
* The greater the number. the bigger the stitch length. * The greater the number. the bigger the stitch length.
* Pleas e put the reverse spanner (3) down at the half place when the NO e put the reverse spanner (3) down at the half place when the NO on the dial (1) turns from
big to small. It will be much easier. big to small. It will be much easier.
Figure 14
17. STITCHING AND REVERS STITCHING AND REVERS E STITCHING

Press the power button.

Push the pedal down and begin to sew. Push the pedal down and begin to sew.
During the process of normal sewing, when you of normal sewing, when you press the reverse spanner (1) or press the auto
reverse button (2), the machine will begin to back stitch. When you lose it, the machine will feed reverse button (2), the machine will begin to back stitch. When you lose it, the machine will feed reverse button (2), the machine will begin to back stitch. When you lose it, the machine will feed
normally. See Fig. (14).
MP03100EN_180912
- up,
Figure 12
Figure 13
press the reverse spanner (1) or press the auto -
on the dial (1) turns from
13