1. GETTING STARTED
1.3 Connecting the cables
In order to access the connection ports, remove the cover.
1.3.1 Connecting the power cord
B
Connect the adapter to the main power cord, the power cord to the power supply and
the plug to an electrical outlet. The adapter is connected into the left port at the bot-
tom of the terminal.
6
A
1.3.2 Connecting the Ethernet cable
Connect the Ethernet cable to the ETH port at the bottom of the terminal. Connect the
other end of the cable either to a broadband modem or a plug.
ETH
1. GETTING STARTED
7