How To Use The Manual Override; To Disengage The Gearbox (Manual Mode); To Re-Engage The Gearbox (Normal Mode) - E.T. Systems Drive 500 User Instructions

To disengage the gearbox (Manual mode)

1. Raise lock cover.
2. Insert the key.
3. Turn the key clockwise.

To re-engage the gearbox (Normal mode)

6. Swing the manual override lever
back into it recess in the gearbox.

How to use the manual override.

Move gate open and closed by hand
To disengage the gearbox (Manual mode)
4. Swing the manual override lever 90
to the gearbox.
To re-engage the gearbox (Normal mode)
7. Turn the key counter clockwise.
8. Remove the key.
9. Lower the lock cover.
5
.
(Manual mode)
o
5. Manoeuvre the gate by hand.
To re-engage the gearbox (Normal mode)
10. Ensure the gearing is engage by
pushing or pulling the gate un l the
gearing "clicks" in.