Standard Mode - E.T. Systems Drive 500 User Instructions

Basic opera ng
features
The BT func ons are the primary full gate opening func ons for motor vehicle access.
There are two ways of ac va ng the "BT" func ons on this control card. Either via the hardwired BT input or the BT receiver channel.
In Standard mode the gates respond to each BT trigger.
In Standard mode you have access to the following advanced features: - Holiday lock-out and Party mode.
Ac on
Momentary BT trigger.
At full open posi on.
Momentary BT trigger.
Momentary BT trigger.
Momentary BT trigger.
Momentary BT trigger.
At full closed posi on.
Gate closed.
"BT" Bu on triggers.

Standard mode.

Gate begins
No buzzer tones.
opening.
Gate stops. No buzzer tones.
Gate begins
No buzzer tones.
closing.
Gate stops and
immediately
No buzzer tones.
starts opening
again.
Gate stops. No buzzer tones.
Gate begins
No buzzer tones.
closing.
Gate stops. No buzzer tones.
8
Response