“Loop” Trigger - E.T. Systems Drive 500 User Instructions

Basic opera ng
features
The Loop trigger mode is exactly the same as Condominium auto-close mode.
The only way to trigger loop detector mode is via the hardwired LPT input.
In Loop detector mode, a LPT trigger is treated as open, and any BT or LPT trigger is treated as a keep opening, keep open triggers or re-open trigger
while the gates are running. The gates will only close once the auto-close mer has med out. The loop mode transac on will only clear once the
gates reach the closed posi on again.
NB! For any auto-close feature to work, a pair of safety infra-red beams must be installed and func oning correctly. If no safety infra-red beams are
installed then the gates will open but not close again.
Ac on
Loop trigger.
Momentary BT trigger
or Loop trigger while
gate is opening.
At full open posi on.
Momentary BT trigger
or Loop trigger while
gate is open.
Auto-close mer
meout. Safety beam
input not triggered.
Momentary BT trigger
or Loop trigger while
gate is closing.
At full open posi on.
Auto-close mer
meout. Safety beam
input not triggered.
At full closed posi on.
Gate closed.
"Loop" trigger.
Gate begins
No buzzer tones.
opening.
The trigger is
ignored and the
No buzzer tone.
gate con nues
opening.
Gate stops
and auto-close
No buzzer tones.
mer starts
coun ng down.
Gate remains
open and auto-
No buzzer tones.
close mer
resets.
Gate begins
No buzzer tones.
closing.
Gate stops and
immediately
No buzzer tones.
starts opening
again.
Gate stops
and auto-close
No buzzer tones.
mer starts
coun ng down.
Gate begins
No buzzer tones.
closing.
Gate stops. No buzzer tones.
14
Response